System Up Time - The length of the time since the router was last powered on or reset.Ĭlick Refresh to get the latest status and settings of the router.ġ.Visit, and log in with the username and password you set for the router.ģ.Select the working mode as Wireless Router and click Save.ģ.Configure the IP parameters of the WAN and click Save.DNS Server - The IP addresses of DNS (Domain Name System) server.When you use Dynamic IP as the internet connection type, click Renew or Release here to obtain new IP parameters dynamically from the ISP or release them. Default Gateway - The Gateway currently used is shown here. Subnet Mask - The subnet mask associated with the WAN IP Address.This field will be blank or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet connection. IP Address - The current WAN (Internet) IP Address.MAC Address - The physical address of the WAN port.WAN - This field displays the current settings of the WAN, and you can configure them on the Network > WAN page.MAC Address - The physical address of the router.Channel Width - The current wireless channel width in use.Channel - The current wireless channel in use.Mode - The current wireless mode which the router works on.Wireless Radio - Indicates whether the wireless radio feature of the router is enabled or disabled.Operation Mode - The current wireless working mode in use.Wireless - This field displays the basic information or status of the wireless function, and you can configure them on the Wireless > Basic Settings page.Subnet Mask - The subnet mask associated with the LAN IP address.IP address - The LAN IP address of the router.MAC address - The physical address of the router.LAN - This field displays the current settings of the LAN, and you can configure them on the Network > LAN page.Hardware Version - The version information of the router’s hardware.Firmware Version - The version information of the router’s firmware.You can view the current status information of the router. The default one is admin (all lowercase) for both username and password.Ģ.Go to Status. Chapter 7 Configure the Router in Range Extender Modeġ.Visit, and log in with the username and password you set for the router.Chapter 6 Configure the Router in Access Point Mode.Chapter 5 Configure the Router in WISP Mode.Chapter 4 Configure the Router in Wireless Router Mode.Chapter 1 Get to Know About Your Router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |